Three Old Reliables

Discover | Handloading |
0
Be Unique And Hit The Bullseye With 2400!

We are indeed fortunate today to not only have so many powders to choose from, but also have them easily accessible. We’ve always had lots of powders, but finding them was certainly not easy in the late 1950s. There were, however three standout powders which were seemingly always available and easy to find, Bullseye, Unique and #2400, all available from Hercules.

Bullseye goes all the way back to 1898 when it was developed by Laflin & Rand. In 1902 it was switched to the DuPont label and then in 1913 Hercules took over some of the DuPont powders, including Bullseye. Of course, today all former Hercules powders are produced under the Alliant label. Bullseye is double-based, with 40-percent nitroglycerin content. It takes up so little powder space care must be used to prevent double-charging the cartridge case. A loading block allowing you to look into each case before seating a bullet is good insurance, as well as a powder sensor on the loading press.

From day one Bullseye has been the powder for target shooters, at least when target shooting was king. Everyone who paid any attention at all knew the standard loads for target shooters were 2.7 grains of Bullseye under a 148-gr. wadcutter in the .38 Special, and 3.5 grains with a 200-gr. bullet in the .45 ACP. With charges such as these, 1 pound of powder resulted in just under 2,600 .38 Special rounds and 2,000 .45 ACP rounds. With 4.5 grains under a 246-gr. roundnose bullet, the standard factory .44 Special load can be duplicated. And 5.0 grains with a 250-gr. bullet in either the .44 Magnum or .45 Colt makes for an accurate and pleasant shooting midrange load.
By John Taffin

>> Click Here << To Read More Sept/Oct 2012 Handloading

Handgunner Sept/Oct 2012 Cover

Purchase A PDF Download Of The September/October 2012 Issue Today!

Get More Handloading

We think you'd be interested in this, too

Wilson Combat EDC X9 2.0
Wilson Combat...

The upgraded Wilson Combat EDC X9 2.0 features an all-new solid frame design and customizable 1911 Style Grips.
Read Full Article
Upgrade That...

The XS Sights R3D 2.0 front and rear sights went into place on the Springfield SA-35 using sight punch and sight tool alone — no filing or sanding required.
Read Full Article
Rudy the...

In place of the pastoral R2-D2-sort of machine the hospital chose, the drug-running robot in Will’s hospital would look more like the Terminator
Read Full Article