Search results for: "colt"

[…] a marketing ID). Ruger’s Blackhawk brand encompasses heavy-duty single-action revolvers. Colt’s “Snake Guns” encompassed their premium double-action revolvers (Python, Diamondback, […]

[…] bad reputation as a result. Properly done by companies like Colt or Smith & Wesson, nickel is a pretty good […]

[…] require a different type of punch. Recently I had a Colt Gold Cup come in for service. Looking it over, […]

[…] he would write about the virtues of S&W Model 24s, Colt SAAs and custom .44 Specials converted from Ruger .357 […]

First Look: Pedersoli Howdah Alaskan .45 Colt/.410

Bond Arms Adds Rowdy XL In .410/.45 Colt

[…] 22 — a Ford Crown Vic police interceptor. The Browning Hi-Power — A Jaguar XK-E. The Colt Python — a Rolls-Royce. But the FNP-45 Competition model reminds me of a Hummer; a vehicle to work hard, go anywhere, do anything except fit a parking space or one-car garage. The FNP-45 will do anything expected of a duty or competition handgun except fit a small hand or conceal under a T-shirt. Actually I don’t want to make too much of the size. Obviously a magazine holding 15 rounds of .45 ACP needs a full-sized pistol wrapped around it. However the 1-piece polymer grip frame adds relatively little size, and it fits my medium-large hand very nicely. I asked some shooters they found it oversized for them, they were able to reach the trigger and operate all the controls. They could make it go bang if they had to. The design of the FNP-45 is what might be called “21st century classic.” The frame is molded polymer and the slide is blackened stainless steel. The operating system is tilt-lock, with an abutment on the barrel ahead of the chamber locking into the front edge of the ejection port. Locking and unlocking are controlled by a cam on the underside of the barrel. Barrel length is 4.5″ with conventional rifling, 6-groove, right-hand 1:16″ twist, and there’s a steel guide rod with a captured, single-coil recoil spring. FNH quality hardly needs comment; the machining of the slide is beautifully done with crisp, straight lines. >> Click Here AHSO11col Sept/Oct Cover

[…] occurred in late 1956. I had one of the first of the brand new 2nd Generation Colt Single Actions; mine happened to be a 71/2″ .45. I had not yet started casting bullets and my reloading press consisted of the Lyman #310 Tong Tool. I found some 230-grain-cast .45 ACP bullets and purchased a Lyman Powder Measure. This particular measure had a scale on the bottom of the drum, as well as sliding-adjustment bars on top. It also came with a chart for setting certain charges. At the time I was still a teenager and definitely in my stupid period, so instead of using the chart as a reference then checking my charge with a powder scale, I skipped the last step. Those 230-grain lead bullets were loaded over what I thought was a proper charge of DuPont’s #5066. When I fired the first round, the 71/2″ reared back and pointed straight up at the sky. I was smart enough to know something was definitely wrong, but dumb enough to make the wrong option to correct it. Instead of pulling the other 49 rounds, I shot them all as fast as I could. I guess I thought shooting them fast would get rid of them quickly enough that nothing would happen. I was without a doubt watched over that day, as I did not hurt myself, or that brand new sixgun. I continued to reload — after I bought a powder scale. Over the years I’ve loaded for virtually everything, and have an inventory of well over 300 bullet molds. For use with the .44 Special and everyday working loads in the .44 Magnum, Keith bullets are molded from wheel-weights and then lubed and sized. During the winter, I purchased a goodly supply of new brass, including 3,000 rounds of .44 Special. I decided to load these in groups of 500, using various Keith bullets in different sizes, and with my three standard .44 Special powders of Unique, Universal and Power Pistol. The priming punch on my progressive press was sticking and often had to be released by hand, making the first 500 an exercise in frustration. After those first 500 rounds, I replaced the priming punch and everything was running so smoothly I got careless, lazy, negligent and stupid. >> Click Here AHND11col2 November/December 2011

[…] And 5.0 grains with a 250-gr. bullet in either the .44 Magnum or .45 Colt makes for an accurate and pleasant shooting midrange load. By John Taffin >> Click Here AHSO12col Handgunner Sept/Oct 2012 Cover

[…] fps. For my test guns, since the query was about comfortable loads in the Colt Lightweight Commander, I went with my 45-year-old Lightweight Commander and a 5″ Kimber Custom CDP II with an alloy frame. I found the 200-grain loads over 5.0 grains of WW231 quite comfortable, and felt like I could shoot as many rounds as I wanted to without having to spend several days resting my hands. While I don’t want to get into the argument concerning carrying handloads in a self-defense pistol I felt factory loads should be an option. I carry handloads in the field but factory loads on pavement. Would it be possible to come up with factory low recoil .45 ACP loads, which would reliably function in a standard 1911 or Commander — without replacing the recoil spring? To this end I contacted Tim Sundles at Buffalo Bore and Mike McNett at DoubleTap. Both men agreed to see what they would come up with, although they were skeptical about the possible results. Both men also went the extra mile, and I thank them both for their willingness to work with us. By John Taffin >> Click Here AHND12col Handgunner Nov/Dec 2012 Cover